All
      0
      Cart

      You May Also Like

      Selling List

      Description Reviews
      6ES7144-4JF00-0AB0 ET200PRO, EM 4 AI-RTD HF
      Digital output module 4DO

      -
      SIMATIC DP, ELECTRONIC MODULES FOR ET200PRO 4 AI RTD HIGH FEATURE, PT100; PT200; PT500; PT1000; NI100; NI200; NI500; NI1000; CHANNEL DIANOSTICS; INCLUSIVE BUS MODULE, CONNECTING MODULE IO 6ES7194-4..00-0AA0 MUST BE ORDERED SEPERATELY
      Supply voltage
      Load voltage L+
      Rated value (DC)24 V
      Reverse polarity protectionYes; against destruction
      Input current
      from backplane bus 3.3 V DC, max.10 mA; Typical
      Power losses
      Power loss, typ.0.7 W
      Address area
      Address space per module
      Address space per module, max.8 byte
      Analog inputs
      Number of analog inputs4
      Cycle time (all channels) max.83 ms; 83 ms at 50 Hz; 69 ms at 60 Hz
      Technical unit for temperature measurement adjustableYes
      Input ranges
      VoltageNo
      CurrentNo
      ThermocoupleNo
      Resistance thermometerYes
      ResistanceYes
      Input ranges (rated values), resistance thermometers
      Cu 10No
      Ni 100Yes
      Input resistance (Ni 100)10000 kΩ
      Ni 1000Yes
      Input resistance (Ni 1000)10000 kΩ
      Ni 120Yes
      Input resistance (Ni 120)10000 kΩ
      Ni 200Yes
      Input resistance (Ni 200)10000 kΩ
      Ni 500Yes
      Input resistance (Ni 500)10000 kΩ
      Pt 100Yes
      Input resistance (Pt 100)10000 kΩ
      Pt 1000Yes
      Input resistance (Pt 1000)10000 kΩ
      Pt 200Yes
      Input resistance (Pt 200)10000 kΩ
      Pt 500Yes
      Input resistance (Pt 500)10000 kΩ
      Input ranges (rated values), resistors
      0 to 150 ohmsYes
      Input resistance (0 to 150 ohms)10000 kΩ
      0 to 300 ohmsYes
      Input resistance (0 to 300 ohms)10000 kΩ
      0 to 600 ohmsYes
      Input resistance (0 to 600 ohms)10000 kΩ
      0 to 3000 ohmsYes
      Input resistance (0 to 3000 ohms)10000 kΩ
      Resistance thermometer (RTD)
      Characteristic linearization
      for resistance thermometerPtxxx, Nixxx
      Characteristic linearization
      ParameterizableYes
      Cable length
      Cable length, shielded, max.30 m
      Analog value creation
      Measurement principleintegrating
      Integrations and conversion time/resolution per channel
      Resolution with overrange (bit including sign), max.15 bit
      Integration time, ms20 / 16,667
      Interference voltage suppression for interference frequency f1 in Hz50 / 60 Hz
      Conversion time (per channel)20.625 ms; 20.625 ms at 50 Hz; 17.25 ms at 60 Hz
      Smoothing of measured values
      ParameterizableYes
      Step: NoneYes; 1 x cycle time
      Step: lowYes; 4 x cycle time
      Step: MediumYes; 16 x cycle time
      Step: HighYes; 64 x cycle time
      Encoder
      Connection of signal encoders
      for resistance measurement with two-wire connectionYes; Line resistances are also measured
      for resistance measurement with three-wire connectionYes
      for resistance measurement with four-wire connectionYes
      Errors/accuracies
      Linearity error (relative to input range), (+/-)0.05 %
      Temperature error (relative to input range), (+/-)0.0020 %/K
      Crosstalk between the inputs, min.-50 dB
      Repeat accuracy in steady state at 25 °C (relative to input area), (+/-)0.015 %
      Operational limit in overall temperature range
      Resistance thermometer, relative to input area, (+/-)0.175 %
      Basic error limit (operational limit at 25 °C)
      Resistance thermometer, relative to input area, (+/-)0.125 %
      Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency
      Series mode interference (peak value of interference < rated value of input range), min.50 dB
      common mode voltage (USS < 2.5 V) , min.70 dB; Interference voltage < 5 V
      Interrupts/diagnostics/status information
      Diagnostic messages
      Wire breakYes
      Group errorYes
      Overflow/underflowYes
      Diagnostics indication LED
      Group error SF (red)Yes
      Parameter
      Diagnosis: wire breakYes
      Load voltageNo
      Measurement type/rangeR4L / R3L / R2L/ TR4L / TR3L / TR2L
      Interference frequency suppression50 / 60 Hz
      Group diagnosticsYes
      Overflow/underflowYes
      UnitDegrees C / Degrees F
      Galvanic isolation
      Galvanic isolation analog inputs
      between the channelsNo
      between the channels and the backplane busYes
      Permissible potential difference
      between the inputs (UCM)5 Vpp AC
      between MANA and M internally (UISO)500 V DC
      Isolation
      Isolation checked with500 V DC
      Dimensions
      Width45 mm
      Height130 mm
      Depth35 mm
      Weights
      Weight, approx.150 g
      StatusJun 16, 2014
      6ES7144-4JF00-0AB0
      SIMATIC DP, Electronic modules for ET 200 PRO 4 AI RTD High Feature, Pt100; PT200; PT500; Pt1000; NI100; NI200; NI500; NI1000; Channel diagnostics; incl. bus module, Connection module IO 6ES7194-4..00-0AA0 order separately

      0

      ★ ★ ★ ★ ★

      12 views

      5 star 0 (0%)
      4 star 0 (0%)
      3 star 0 (0%)
      2 star 0 (0%)
      1 star 0 (0%)

      Reviews

      All Reviews（0） Image/Video（0） star（0）

      Picks for you